Overview


This application note covers the retrofit of a Comm/net systems battery rack alarm wiring for connection to the System Interface Card of Emmerson NetSure 721 power plant for breaker trip monitoring. For the complete procedure open the attached PDF.


Required Materials


016-1802-10: Hot Jumper Kit for Battery Rack Alarm Wire ( 1 Kit per bay is required)

Wire Cutters

Wire Crimper for 18 AWG connectors

Sockets or wrenches

18 AWG Wire

Screwdrivers


Diagram 1: Alarm connection one line



If you are experiencing problems, please contact Comm/net Systems Support


 

Comm/net Systems Inc. Support


Support@CommnetSystems.com

(206) 282-8670

or submit a support ticket through this portal.